彩乐乐网

Hello, welcome to visit Mingke.com

彩乐乐网 | Help Center | About Us | Mingke Official Website

Recently Viewed

Common sense of ultra pure water machine maintenance

Release Date: 2019-12-07

Laboratory ultrapure water machine failure types and instrument maintenance methods

1. Leakage from laboratory ultrapure water device

For this kind of failure, first find the leak point and check whether the component is damaged or the connection is leaking;

Water leakage at the connection is usually wrapped around the raw material tape or reconnected;

2. The booster pump does not start and cannot make water

Check whether there is power failure and whether the plug is plugged in;

Check whether the low-voltage switch is malfunctioning and the power cannot be connected;

3. The high-pressure pump works normally, but cannot make water

Water inlet solenoid valve fails to enter water;

Front filter plugged

4. Insufficient flow of pure water reduces water production

The front filter is blocked, replace the filter;

RO membrane is blocked, replace reverse osmosis membrane;

5, ultra-pure aquatic water quality is less than 18.2

The ultra-purification column reaches saturation and needs to be replaced after losing ion exchange capacity;

The ultra pure water detection instrument is damaged and the detection is inaccurate;

6, the laboratory ultra pure water machine running noise

Check whether the raw water pipeline is cut off, causing the booster pump to idle, resulting in loud noise of the pure water machine

Check whether the raw water is normal, if there is no tower water supply, whether there is gas in the water;

Check whether the booster pump is malfunctioning, the vibration is too large, there is a friction sound, etc .;

Check whether the water purifier is placed stably;

Check whether the water pipe is too long, and the vibration of the pump makes the water pipe hit the casing;

Processing......
Ranch